Go to Homepage
Best Swivel Bench Vises Compared for 2026: 5 Top Picks

Best Swivel Bench Vises Compared for 2026: 5 Top Picks

Best swivel bench vises compared: five 4 to 5 inch models by jaw opening, weight and swivel range. Read the comparison and pick yours.

Share

Five swivel-base bench vises in the 4 to 5 inch jaw class compared on opening, throat, weight and swivel range so you can choose with confidence

A bench vise is the tool that holds everything else in place, and in a garage or home workshop it ends up doing far more than it was bought for: sawing steel bar, filing edges, bending strap, holding pipe and pinning small parts for drilling. The trouble is that vises in the 4 to 5 inch jaw class look alike in photos but differ a lot in how much stock they open to, how far they turn, and how much iron sits under your work.

This comparison looks at five swivel-base models using four criteria. Jaw width and maximum opening decide what you can hold. Throat depth decides how far a workpiece can hang below the jaw tops. Weight tells you how steady the vise stays during sawing and hammering. Swivel range shows how easily you can turn work without unbolting anything.

Below you will find each vise described in plain terms, with the specifications that could be confirmed from the makers, a clear statement of who each one suits and who should look elsewhere, and a short list of common buyer questions. An editor’s pick is named at the top, with the reason for choosing it.

ProductAmazon ratingBest forLink
Wilton General Purpose Bench Vise 11105, 5 Inch Jaw ★★ 4.7/5
(1,585)
Wide-jaw general garage useView →
Wilton Utility Bench Vise 674U, 4-1/2 Inch Jaw★ 4.7/5
(203)
Rotating work, pipe and formingView →
Wilton General Purpose Bench Vise 11104, 4 Inch Jaw★ 4.7/5
(1,585)
Small parts, compact benchesView →
Yost Vises LV-4 Homeowner's Vise, 4.5 Inch Jaw★ 4.5/5
(10,808)
Occasional home repairsView →
Pony Jorgensen 29050 5 Inch Heavy-Duty Workshop Bench Vise★ 4.0/5
(21)
Heavy sawing and filingView →

Wilton General Purpose Bench Vise 11105, 5 Inch Jaw

Click to view Wilton General Purpose Bench Vise 11105, 5 Inch Jaw

The Wilton 11105 is the widest general purpose model in this group, with a 5 inch jaw width, a 4 inch maximum jaw opening and a 2-1/2 inch throat depth. It sits on a swivel base that turns through 120 degrees and locks with double lockdowns, and a large anvil behind the jaws gives you a surface for light hammering and forming. At roughly 27 pounds net it is the heavier of the two general purpose Wilton models, which helps it stay put under hacksaw strokes and filing.

It suits a garage or home workshop where a wide jaw face matters more than a full circle of swivel. The trade-offs are the swivel range, which is narrower than the 360 degree base on the Wilton 674U, and a 4 inch opening that is no larger than that model despite the wider jaws. It also weighs noticeably more, so plan on a sturdy bench to carry it.

★ 4.7/5 · 1,585 Amazon ratings✓ Best for: Wide-jaw general garage use✗ Not ideal for: Full-circle swivel needsCheck Price on Amazon →

Wilton Utility Bench Vise 674U, 4-1/2 Inch Jaw

Click to view Wilton Utility Bench Vise 674U, 4-1/2 Inch Jaw

The Wilton 674U Utility Bench Vise pairs a 4-1/2 inch jaw width with a 4 inch jaw opening and a base that swivels a full 360 degrees with dual lockdowns. The body and movable jaw are gray cast iron, while the base is ductile iron, and the jaw faces are replaceable hardened steel with a serrated pattern. Built-in pipe jaws accept pipe from 1/8 inch to 1-1/2 inch, and a large anvil is included for forming work.

Net weight is about 16.5 pounds, so it is much lighter than the Wilton 11105 while matching its 4 inch opening. That makes it a good fit for a mixed workshop where you reposition long stock often or need to rotate work to reach every side. The trade-offs are a jaw face half an inch narrower than the 11105 and a lighter body that gives up some mass during heavy filing or hammering.

★ 4.7/5 · 203 Amazon ratings✓ Best for: Rotating work, pipe and forming✗ Not ideal for: Heavy hammering sessionsCheck Price on Amazon →

Wilton General Purpose Bench Vise 11104, 4 Inch Jaw

Click to view Wilton General Purpose Bench Vise 11104, 4 Inch Jaw

The Wilton 11104 is the compact member of the general purpose line, with a 4 inch jaw width, a 3 inch maximum jaw opening and a 2-1/4 inch throat depth. Its swivel base turns through 120 degrees and locks down, and it has a large anvil like its bigger sibling, the Wilton 11105. Net weight is about 16 pounds, close to the Wilton 674U, yet it opens a full inch less than that model and has a shallower throat.

It suits light repair, small metal and wood parts, and benches with limited space. The trade-offs are clear: the 3 inch opening limits stock thickness, the swivel range is a third of the 360 degree base on the 674U, and the narrower jaws give less gripping surface than the 11105. Buyers who clamp mostly small items will rarely run into those limits.

★ 4.7/5 · 1,585 Amazon ratings✓ Best for: Small parts, compact benches✗ Not ideal for: Thick stock or big pipeCheck Price on Amazon →

Yost Vises LV-4 Homeowner’s Vise, 4.5 Inch Jaw

Click to view Yost Vises LV-4 Homeowner’s Vise, 4.5 Inch Jaw

The Yost LV-4 Homeowner’s Vise has 4-1/2 inch jaws, a 3 inch jaw opening and a throat depth of about 2.6 inches. The base swivels 240 degrees and locks in place, and the maker describes the castings as 30,000 PSI cast iron. Replaceable hardened steel jaw faces are serrated for grip, and the vise holds pipe and tube from 0.6 inch to 1.85 inch in diameter. Retailer data puts the weight near 9 pounds, making it by far the lightest vise in this group.

That suits a homeowner who does occasional repairs, hobby projects or light fabrication and wants something easy to move or store. The trade-off is mass and capacity: at 9 pounds it will not resist hard filing or hammering like the heavier models, and its 3 inch opening matches only the smaller Wilton 11104. Yost sells replacement lock-down handles and soft jaw covers for it.

★ 4.5/5 · 10,808 Amazon ratings✓ Best for: Occasional home repairs✗ Not ideal for: Heavy-duty metalworkingCheck Price on Amazon →

Pony Jorgensen 29050 5 Inch Heavy-Duty Workshop Bench Vise

Click to view Pony Jorgensen 29050 5 Inch Heavy-Duty Workshop Bench Vise

The Pony Jorgensen 29050 is a 5 inch heavy-duty workshop vise made from grey iron castings with an orange powder-coated finish. It has replaceable hardened steel serrated jaw faces, a large ground and polished anvil, permanent pipe jaws and a swivel base that locks down with a nut. Maximum opening is 4 inches, and retailer data puts the weight around 27 pounds, which is similar to the Wilton 11105.

It suits a garage owner who wants a substantial, wide-jawed vise for sawing, filing and general repair, and who values a heavy body that stays put. The trade-offs are weight, which asks for a solid bench and a firm mounting, and an opening that is the same 4 inches you get from lighter, narrower models such as the Wilton 674U. It is a straightforward, traditional design rather than a feature-packed one.

★ 4.0/5 · 21 Amazon ratings✓ Best for: Heavy sawing and filing✗ Not ideal for: Light, portable setupsCheck Price on Amazon →

Conclusions

The Wilton 11105 is the choice for a garage bench that sees a bit of everything. Its 5 inch jaws, 4 inch opening, large anvil and roughly 27 pounds of mass make it a steady all-rounder, provided a 120 degree swivel range is enough for your work. … read more

The Wilton 674U is the pick if you want to turn work freely. Its 360 degree swivel, 4 inch opening, built-in pipe jaws and lighter 16.5 pound body suit mixed jobs, though it gives up some jaw width and mass compared with the 11105. … read more

The Wilton 11104 fits a small bench and light work. With 4 inch jaws, a 3 inch opening and about 16 pounds of weight, it handles small parts well, but thick stock and long swivel turns are better served by the 674U or 11105. … read more

The Yost LV-4 is the lightest option here and suits occasional home repairs. Its 4-1/2 inch jaws, 240 degree swivel and about 9 pound weight are easy to live with, but it is less suited to hard hammering or sustained heavy filing than the heavier vises. … read more

The Pony Jorgensen 29050 is a solid, traditional choice for sawing and filing. Its 5 inch jaws, grey iron castings, pipe jaws and weight of around 27 pounds reward a sturdy bench, though it offers the same 4 inch opening as lighter models in this comparison. … read more

Frequently Asked Questions

What does a swivel base do on a bench vise?

A swivel base lets you rotate the vise body on its mount and lock it at a new angle, so you can reach another side of a workpiece without unbolting anything. In this group the Wilton 674U turns 360 degrees, the Yost LV-4 turns 240 degrees, and the Wilton 11104 and 11105 turn 120 degrees.

Which of these vises opens the widest?

The Wilton 11105, the Wilton 674U and the Pony Jorgensen 29050 each open to 4 inches. The Wilton 11104 and the Yost LV-4 open to 3 inches. Jaw width differs separately, from 4 inches on the 11104 up to 5 inches on the 11105 and the Pony.

Does a heavier vise make a difference when sawing or filing?

Generally yes, because more cast iron mass absorbs vibration and resists walking on the bench. The Wilton 11105 and Pony Jorgensen 29050 weigh around 27 pounds, the Wilton 674U about 16.5 pounds, the Wilton 11104 about 16 pounds and the Yost LV-4 about 9 pounds.

Can these vises hold pipe?

The Wilton 674U has built-in pipe jaws for pipe from 1/8 inch to 1-1/2 inch, the Yost LV-4 holds pipe and tube from 0.6 inch to 1.85 inch, and the Pony Jorgensen 29050 has permanent pipe jaws. The Wilton 11104 and 11105 are described as general purpose vises with a large anvil.

Can I hammer on the anvil of a bench vise?

Light hammering and forming on the anvil is what it is meant for on the Wilton 11104, 11105 and 674U and the Pony Jorgensen 29050, which all have an anvil surface. Keep blows modest, and remember the lighter Yost LV-4 has less mass to absorb impact.

We use cookies. Analytics cookies help us understand how visitors use this site. See our Privacy Policy for details.