Best Oscillating Multi-Tool Blade Sets Compared for 2026: 5 Picks
Best oscillating multi-tool blade sets compared by blade material, fit and contents for wood, metal and drywall. Read the comparison and pick your set.
Five oscillating blade assortments compared so you can match the right mix of wood, metal and drywall blades to your tool and your jobs
An oscillating multi-tool is only as useful as the blade on it. Flush cuts on door casing, plunge cuts in drywall, and a stray nail or screw hiding in a framing member all call for different blades, and buying them one at a time gets expensive and slow.
This comparison looks at five assortment sets built to cover wood, metal and drywall. The criteria were blade material, such as carbide, bi-metal or high-carbon steel, whether the mount will fit your tool, how many blades and accessories come in the box, and whether a case keeps them organized.
Below you will find an overview of each set, who it suits and who should skip it, a short conclusion for each, and answers to common questions about fit and blade choice.
| Product | Amazon rating | Best for | Link |
|---|---|---|---|
| Diablo Universal Fit Oscillating Blade Set, 5-Piece ★ | ★ 4.7/5 (727) | Mixed general jobsite cutting | View → |
| Bosch OSL005C 5-Piece Starlock Oscillating Multi-Tool Blade Set | ★ 4.7/5 (624) | Starlock tool owners | View → |
| Dremel MM389 5-Piece Oscillating Blade Assortment (Universal Quick-Fit) | ★ 4.6/5 (127) | Flush cuts and trim work | View → |
| Asani 24-Piece Oscillating Multi-Tool Saw Blades and Accessories Set | ★ 4.5/5 (1,072) | Large variety, occasional use | View → |
| Arrow 10-Piece Oscillating Multi-Tool Blade Kit | ★ 4.7/5 (5) | Wood and drywall remodeling | View → |
Diablo Universal Fit Oscillating Blade Set, 5-Piece
This Diablo set (DOU5S) packs five general-purpose blades that mix carbide and bi-metal construction. The blades are meant for wood, wood with nails, metal and drywall, including a 2 inch bi-metal blade for drywall.
It uses a universal mount that fits most major oscillating tools without an adapter, but it is not made for Starlock interface tools. That makes it a practical first set for a tradesperson who meets wood, trim, drywall and the occasional piece of metal in the same week.
The trade-off is size. Five blades is a small assortment, so heavy users will go through the carbide pieces and need refills sooner than with a bulk kit, and the mix leans toward general work over specialty tasks.
Bosch OSL005C 5-Piece Starlock Oscillating Multi-Tool Blade Set
This Bosch set is built for the Starlock interface, so it fits Starlock-compatible oscillating tools and is not a universal-fit set. Starlock owners get a mount designed for a firm, positive grip on the blade and quick blade changes.
The set holds five blades covering wood, metal and general-purpose cutting, with a carbide blade included for tougher work and a scraper for removing sealant and adhesive.
It is a good fit for someone who has already moved to Starlock tools and wants a brand-matched starter assortment. The limits are the small blade count and the mount: if your multi-tool uses a different interface, this set will not suit it without extra hardware.
Dremel MM389 5-Piece Oscillating Blade Assortment (Universal Quick-Fit)
The Dremel MM389 is a five-piece cutting assortment with a storage case. It includes three half-moon cutting blades, one wood flush-cutting blade and one bi-metal flush-cutting blade, in sizes from 1-1/4 inch to 3 inch.
It is sold under the Universal Quick-Fit name, aimed at Dremel Multi-Max tools and other oscillating tools that accept that style of blade. The half-moon blades are useful for trimming and cutting pipe, plastic and softer materials, while the flush-cut blades handle trim, door jambs and baseboards.
This set suits finish carpenters and remodelers who do more flush cutting than demolition. The trade-off is that the mix is lighter on drywall and heavy metal work, and without carbide pieces it will not be the first choice for cutting nails or hard steel.
Asani 24-Piece Oscillating Multi-Tool Saw Blades and Accessories Set
The Asani kit is the largest count in this comparison, with 24 pieces that combine saw blades for cutting with accessories to round out the set. The idea is a single box that covers many jobs, from wood and plastic to thin metal, without buying separate packs.
It is marketed as fitting many oscillating tools from brands such as Makita, Milwaukee, Fein and Ridgid. For a homeowner, a hobbyist or a shop that wants plenty of spare blades on the shelf, the piece count gives good coverage for the money-conscious buyer.
The trade-off is that a large mixed kit usually spreads its quality across many small parts. Professionals making daily heavy cuts may prefer fewer, more specialized blades from a dedicated brand, while occasional users will likely appreciate the variety.
Arrow 10-Piece Oscillating Multi-Tool Blade Kit
The Arrow kit holds ten blades with a storage case. The mix is two drywall blades, four fast-cutting wood blades, one blade for wood with nails, two general-purpose blades and one metal-cutting blade, so it leans toward wood and drywall work.
The blades are made from high-carbon steel and bi-metal, with a titanium-coated finish listed on some of them, and the set is described as a universal fit for most major brands of oscillating tools including Dremel, Milwaukee and DeWalt.
It suits remodelers and DIYers who cut mostly framing, sheathing and drywall and want spare wood blades on hand. The trade-off is that there are no carbide blades in the set, so tough metal, hardened fasteners and abrasive materials will wear these blades faster than a carbide option would.
Conclusions
Diablo Universal Fit Oscillating Blade Set, 5-Piece is the most balanced choice here. It combines carbide and bi-metal blades for wood, nails, metal and drywall in a universal mount, which suits most people with a standard oscillating tool. … read more
Bosch OSL005C 5-Piece Starlock Oscillating Multi-Tool Blade Set is the right pick if your tool uses the Starlock interface. It brings a carbide blade, a scraper and several blade shapes, but it is not for universal-mount tools. … read more
Dremel MM389 5-Piece Oscillating Blade Assortment is a strong choice for trim and flush-cut work. Its half-moon and flush-cut blades and included case suit finish carpentry, though it is less suited to heavy metal or drywall jobs. … read more
Asani 24-Piece Oscillating Multi-Tool Saw Blades and Accessories Set gives the broadest piece count for a home workshop. It works well for occasional use across many materials, but daily professional cutting may call for more specialized blades. … read more
Arrow 10-Piece Oscillating Multi-Tool Blade Kit is a sensible wood and drywall kit with a case and spare blades. Without carbide pieces it is best for framing and remodeling, not for repeated cuts in hard metal. … read more
Frequently Asked Questions
What is the difference between carbide and bi-metal oscillating blades?
Bi-metal blades have hardened teeth welded to a flexible steel body and cut wood, nails, drywall and thin metal well. Carbide blades hold an edge longer in hard materials such as metal or abrasive board, but they cost more to replace when damaged.
Will a Starlock blade set fit any oscillating multi-tool?
No. A Starlock set like the Bosch OSL005C needs a tool with the Starlock interface. Universal-fit sets such as the Diablo or Arrow kits are made for a conventional mount found on many other brands.
Which blade should I use to cut wood with nails in it?
Use a bi-metal or carbide blade rated for wood with nails. The Diablo set includes a bi-metal blade for nail-embedded wood and the Arrow kit includes a dedicated wood-with-nails blade.
What blades are best for flush cuts on trim and door casing?
Flush-cut blades have an offset or short profile that lets the teeth cut against a surface without damaging it. The Dremel MM389 includes both a wood flush-cut blade and a bi-metal flush-cut blade for this task.
Is a bigger blade kit always the better choice?
Not necessarily. A 24-piece kit gives more variety and spares, but a small set with carbide and bi-metal blades may last longer on hard materials. Match the mix of blades to the work you do most.



