Go to Homepage
Best Digital Multimeters Compared for 2026: 5 Top Picks for Electricians

Best Digital Multimeters Compared for 2026: 5 Top Picks for Electricians

Best digital multimeters compared for 2026: see five handheld meters side by side for electrical, HVAC and auto work. Read the comparison and choose yours.

Share

Five handheld multimeters compared on CAT rating, counts, current range and extras so you can match a meter to your trade

A multimeter is the tool you reach for when a circuit will not behave: a dead outlet, a furnace that will not fire, a car that drains its battery overnight. The trouble is that meters look alike on the shelf while differing in ways that matter on the job, such as how they read odd waveforms, what voltage category they are built for, and how they handle phantom voltage.

This comparison weighs five handheld meters on a short list of criteria. First, the safety category and voltage rating, because that decides where the meter belongs in a panel or at a service entrance. Second, whether it reads true-RMS, which affects accuracy on motor and drive loads. Third, the measuring range, including current, resistance, capacitance and temperature. Fourth, practical extras such as non-contact voltage detection, a low-impedance mode and a backlight.

Each section below sets out the verified specifications, the honest trade-offs and the kind of work the meter suits. A short conclusion for each, an editor pick and a set of common questions follow, so you can narrow the field quickly.

ProductAmazon ratingBest forLink
Fluke 117 True-RMS Digital Multimeter with Non-Contact Voltage Detection ★★ 4.8/5
(5,238)
Electricians and HVAC troubleshootingView →
Fluke 115 Compact True-RMS Digital Multimeter★ 4.8/5
(3,085)
Core field measurementsView →
Klein Tools MM400 Auto-Ranging Digital Multimeter 600V★ 4.6/5
(4,161)
Apprentices and general troubleshootingView →
Milwaukee GIDDS2-288935 Digital Multimeter 2217-20★ 4.5/5
(86)
Long-warranty AA-powered useView →
Extech EX355 12-Function True RMS Multimeter with NCV 6000 Count★ 4.1/5
(129)
Mixed electrical and HVAC workView →

Fluke 117 True-RMS Digital Multimeter with Non-Contact Voltage Detection

Click to view Fluke 117 True-RMS Digital Multimeter with Non-Contact Voltage Detection

The Fluke 117 is a true-RMS meter rated CAT III 600 V with a 6,000-count display. It measures AC and DC current up to 10 A, with a 20 A overload allowed for up to 30 seconds. Resistance runs through a 40 megohm range, capacitance reaches 9,999 microfarads and frequency goes up to 50 kHz.

What sets it apart in this group is the combination of integrated non-contact voltage detection, AutoVolt selection that picks AC or DC when you set the dial, and a selectable low-impedance mode meant to suppress false readings from ghost voltage. A backlight helps in dim panels, the meter runs on a 9 V alkaline battery rated at about 400 hours typical without the backlight, and Fluke backs it with a 3-year warranty.

The trade-off is that the 10 A current limit is modest for heavy loads, and the 20 A overload is time-limited. Buyers often mention that it is a compact all-rounder for electricians who also work on HVAC controls.

★ 4.8/5 · 5,238 Amazon ratings✓ Best for: Electricians and HVAC troubleshooting✗ Not ideal for: Heavy current measurementCheck Price on Amazon →

Fluke 115 Compact True-RMS Digital Multimeter

Click to view Fluke 115 Compact True-RMS Digital Multimeter

The Fluke 115 is a compact true-RMS meter rated CAT III 600 V. True-RMS applies to AC voltage and AC current readings, and the display is 6,000 counts. Current is measured up to 10 A on its 6.000 A and 10.00 A ranges, with a 20 A overload permitted for 30 seconds at most.

Resistance goes to 40 megohms, capacitance to 9,999 microfarads and frequency to 50 kHz across four ranges. It also records minimum, maximum and average readings with elapsed time, which is handy for chasing an intermittent fault. The backlit display aids work in poorly lit spaces, power comes from a 9 V alkaline battery with about 400 hours typical life without the backlight, and the warranty is 3 years.

Compared with the 117 it lacks non-contact voltage detection and the AutoVolt feature that selects AC or DC for you, so you choose the mode yourself. That keeps the design simpler and is a fair choice for field technicians who want core measurements in a sturdy, familiar layout.

★ 4.8/5 · 3,085 Amazon ratings✓ Best for: Core field measurements✗ Not ideal for: Ghost voltage and NCV checksCheck Price on Amazon →

Klein Tools MM400 Auto-Ranging Digital Multimeter 600V

Click to view Klein Tools MM400 Auto-Ranging Digital Multimeter 600V

The Klein Tools MM400 is an auto-ranging meter with a 4,000-count LCD and a CAT III 600 V safety rating. It measures up to 600 V AC and DC, 10 A AC and DC current and resistance up to 40 megohms, with capacitance to 200 microfarads and frequency from 1 Hz to 50 kHz. Klein states it is built to survive a drop from 1 meter.

The manual stresses that the CAT III and CAT IV test lead shield should be pressed firmly in place for work in those locations, and it may only be removed for CAT II environments. That is a useful detail for anyone moving between panel work and lighter-duty tasks.

The trade-offs are a lower count than the 6,000-count meters in this group, which means coarser resolution on small readings, and it is a straightforward meter without non-contact voltage detection. Klein also indicates the model is no longer in production, so availability varies. It suits apprentices and general electrical troubleshooting where straightforward voltage, current and resistance checks make up most of the work.

★ 4.6/5 · 4,161 Amazon ratings✓ Best for: Apprentices and general troubleshooting✗ Not ideal for: Fine low-level readingsCheck Price on Amazon →

Milwaukee GIDDS2-288935 Digital Multimeter 2217-20

Click to view Milwaukee GIDDS2-288935 Digital Multimeter 2217-20

The Milwaukee 2217-20 is a true-RMS meter with a 6,000-count display, and Milwaukee states it is rated CAT III 600 V. It measures up to 600 V AC and DC and 10 A AC and DC current, with resistance up to 40 megohms. Contact temperature readings run from minus 40 to 752 degrees Fahrenheit.

A Lo-Z mode is included to eliminate ghost voltage, and the white-on-black display is backlit for contrast in dim spaces. Power comes from two AA batteries, which are easy to find in any job-site kit, and the meter carries a 5-year warranty, the longest in this group.

The trade-offs are the same 10 A current ceiling shared by most meters here and the absence of non-contact voltage detection. Some retailers also list the model as discontinued, so stock can be inconsistent. It fits electricians who value a long warranty and a familiar tool brand.

★ 4.5/5 · 86 Amazon ratings✓ Best for: Long-warranty AA-powered use✗ Not ideal for: NCV-based quick checksCheck Price on Amazon →

Extech EX355 12-Function True RMS Multimeter with NCV 6000 Count

Click to view Extech EX355 12-Function True RMS Multimeter with NCV 6000 Count

The Extech EX355 is a 12-function true-RMS, auto-ranging meter with built-in non-contact voltage detection and a Type K temperature input. It is rated CAT III 600 V, measures voltage up to 600 V AC and DC and current up to 10 A, and has a basic DC voltage accuracy of 0.5 percent. The Type K input reads from minus 40 to 1000 degrees Celsius with a suitable probe.

It weighs about 13 ounces and measures roughly 6.7 by 3.2 by 1.9 inches, so it is easy to carry in a tool bag. Extech provides a 3-year warranty. The wide function count, including capacitance and frequency, makes it flexible for electrical, HVAC and automotive checks.

The trade-offs are that published specifications for this model vary between sources in a few places, so it is best treated as a general-purpose meter instead of a precision instrument. It has no low-impedance mode, which matters when ghost voltage is a concern. It suits technicians who want NCV and a temperature input at a modest step above entry level.

★ 4.1/5 · 129 Amazon ratings✓ Best for: Mixed electrical and HVAC work✗ Not ideal for: Ghost voltage troubleshootingCheck Price on Amazon →

Conclusions

The Fluke 117 is the most complete meter here, pairing true-RMS and CAT III 600 V with non-contact voltage detection, AutoVolt and a low-impedance mode. It is a strong choice for electricians who also troubleshoot HVAC controls, though its 10 A limit and 9 V battery are worth noting. … read more

The Fluke 115 delivers true-RMS, a 6,000-count display and min/max recording in a compact CAT III 600 V body. It is a good fit for field technicians who want core measurements without NCV, though you select AC or DC yourself. … read more

The Klein Tools MM400 covers 600 V and 10 A work with a CAT III 600 V rating and a 1 meter drop rating. It suits apprentices and general troubleshooting, though its 4,000 counts are coarser and availability varies. … read more

The Milwaukee 2217-20 offers true-RMS, a 6,000-count display, Lo-Z mode and a 5-year warranty with AA batteries. It suits electricians who value a long warranty, though it has no NCV and some stock is listed as discontinued. … read more

The Extech EX355 combines true-RMS, built-in NCV and a Type K temperature input with CAT III 600 V rating and a 3-year warranty. It is useful for mixed electrical and HVAC work, though it has no low-impedance mode and some specifications differ between sources. … read more

Frequently Asked Questions

What does true-RMS mean on a multimeter?

A true-RMS meter calculates the effective value of AC signals that are not clean sine waves, such as loads on motors or electronic drives. Average-responding meters can read these waveforms inaccurately. The Fluke 117, Fluke 115, Milwaukee 2217-20 and Extech EX355 are described as true-RMS.

Which of these multimeters has non-contact voltage detection?

The Fluke 117 has integrated non-contact voltage detection, and the Extech EX355 has a built-in NCV detector as well. Both let you check for energized conductors before probing, while the other meters here rely on direct test lead measurements.

What is a Lo-Z mode used for on a multimeter?

A low-impedance mode loads the circuit slightly so that ghost or stray voltage, which can appear on unused wires, drops away. The Fluke 117 offers a selectable mode for this, and the Milwaukee 2217-20 includes Lo-Z measurement for the same purpose.

How much current can these multimeters measure?

The Fluke 117, Fluke 115, Klein Tools MM400, Milwaukee 2217-20 and Extech EX355 all measure up to 10 A AC and DC. The two Fluke meters allow a 20 A overload for up to 30 seconds. For larger currents, a clamp meter is the usual tool.

Do these multimeters carry a CAT III 600 V rating?

Yes, all five are described as CAT III 600 V by their makers. CAT III covers distribution-level circuits such as panels and branch wiring. Use the meter within its rated category and voltage.

We use cookies. Analytics cookies help us understand how visitors use this site. See our Privacy Policy for details.