Go to Homepage
Best Cross-Slide Drill Press Vises Compared for 2026: 5 Picks

Best Cross-Slide Drill Press Vises Compared for 2026: 5 Picks

Best cross-slide drill press vise comparison of five 4-inch models for drilling and light milling. See the specs and pick yours.

Share

Five 4-inch cross-slide vises compared on jaw size, travel, gibs and build so you can pick one for drilling and light milling

If you drill a lot of small parts on a benchtop drill press, you know the routine: clamp the work, nudge it, re-clamp, and try to land the bit on a punch mark. A cross-slide vise lets you move the work in two directions with handwheels instead of tapping it around by hand, and it can double as a basic X-Y table for light milling.

This guide compares five cast-iron vises in the 4-inch jaw class. The criteria that matter most are jaw width and depth, how far each slide travels, whether the slides have adjustable gibs to take up play, and how the base mounts to your drill press table.

Below you will find an overview of each vise, who it suits and who should skip it, a short conclusion for each, and answers to common questions. All of these are meant for drilling and light cuts, not heavy milling.

ProductAmazon ratingBest forLink
Wilton Cross-Slide Drill Press Vise CS4 (11694), 4 inch jaws ★★ 4.1/5
(941)
Everyday drilling and light millingView →
Shop Fox D4082 4-Inch Cross-Sliding Vise with Slide Bar★ 4.0/5
(298)
Square, guided jaw clampingView →
Grizzly Industrial G1064 4-Inch Cross-Sliding Vise★ 4.1/5
(128)
Straightforward drill press workView →
WEN CV414 4.25-Inch Cross Vise with Compound Slide★ 4.1/5
(261)
Longer travel, graduated dialsView →
Klutch AT-CSV-04 Cross Slide Drill Press Vise, 4 inch jaws★ 3.8/5
(3)
Basic home-shop drillingView →

Wilton Cross-Slide Drill Press Vise CS4 (11694), 4 inch jaws

Click to view Wilton Cross-Slide Drill Press Vise CS4 (11694), 4 inch jaws

The Wilton CS4 is a cast-iron cross-slide vise with a 4 inch jaw width and a 1-3/8 inch jaw depth. Wilton lists the jaws as hardened with a V-groove, which helps hold round stock such as rod and tube as well as flat blocks.

Retail specifications put the weight at about 20 pounds, so it is a bit lighter than some rivals while still giving a stable platform on a benchtop drill press. It is built around two dovetail-style slides driven by handwheels, with a base that bolts to the drill press table.

Like most vises of this type, buyers often mention that the slides benefit from a little oil and a check of the gib screws when it first arrives. Once set up, it is a sensible all-round choice for drilling, reaming and light milling in a home shop.

★ 4.1/5 · 941 Amazon ratings✓ Best for: Everyday drilling and light milling✗ Not ideal for: Heavy milling cutsCheck Price on Amazon →

Shop Fox D4082 4-Inch Cross-Sliding Vise with Slide Bar

Click to view Shop Fox D4082 4-Inch Cross-Sliding Vise with Slide Bar

The Shop Fox D4082 is a 4 inch cross-sliding vise whose distinguishing feature is its slide bar. The bar is there to keep the movable jaw guided as you tighten, which helps the jaw stay square to the work.

It is a cast-iron design in the same general format as the others here: two perpendicular slides, each moved with a handwheel, mounted on a base that fastens to the drill press table. It suits benchtop drilling and light milling where you need to place holes accurately along a line or a pattern.

As with other budget-friendly cast-iron cross vises, buyers often mention that slide smoothness can vary from unit to unit. Plan to clean off the factory coating, apply way oil, and adjust the gibs until the slides move freely without noticeable wobble.

★ 4.0/5 · 298 Amazon ratings✓ Best for: Square, guided jaw clamping✗ Not ideal for: Precision milling workCheck Price on Amazon →

Grizzly Industrial G1064 4-Inch Cross-Sliding Vise

Click to view Grizzly Industrial G1064 4-Inch Cross-Sliding Vise

The Grizzly G1064 has a 4 inch jaw width and a 1-3/8 inch jaw depth. Grizzly lists 4 inches of travel on both the bottom and top slides, an overall height of 5-1/4 inches, and an approximate weight of 22 pounds.

Its dovetailed slides use adjustable gibs, so you can take up play as the slides wear in. The base measures 5 by 10-1/2 inches, with 7/16 inch mounting slots spaced 4-3/4 inches apart, which fit the slotted tables on many benchtop drill presses.

Grizzly describes it as suited to most drill press work, and it is not intended for precision milling. Buyers often mention that these cast-iron vises arrive with stiff or gritty slides until they are cleaned, oiled and adjusted, so budget a little time for setup.

★ 4.1/5 · 128 Amazon ratings✓ Best for: Straightforward drill press work✗ Not ideal for: Precision millingCheck Price on Amazon →

WEN CV414 4.25-Inch Cross Vise with Compound Slide

Click to view WEN CV414 4.25-Inch Cross Vise with Compound Slide

The WEN CV414 has slightly larger jaws than the rest, at 4.25 inches wide and 1.25 inches deep. It has a powder-coated cast-iron body and travel of about 5.8 inches side to side and 6 inches front to back, which is more reach than the other vises in this group.

The handwheels are marked in 0.1 mm increments, with each full turn moving the slide 3 mm. That scale makes it easier to move to a repeatable position when you drill a row of holes or take a light facing pass in a drill press or small mill setup.

The extra travel and graduated dials are the main attractions. As with any cast-iron cross vise in this class, buyers often mention that the slides may need cleaning, oiling and gib adjustment, and that it should be used for light cuts rather than aggressive milling.

★ 4.1/5 · 261 Amazon ratings✓ Best for: Longer travel, graduated dials✗ Not ideal for: Heavy cutting loadsCheck Price on Amazon →

Klutch AT-CSV-04 Cross Slide Drill Press Vise, 4 inch jaws

Click to view Klutch AT-CSV-04 Cross Slide Drill Press Vise, 4 inch jaws

The Klutch AT-CSV-04 is a cast-iron cross-slide vise with 4 inch jaws, aimed at the same drilling and light milling jobs as the others here. Like its rivals it uses two handwheel-driven slides on a base that bolts down to the drill press table.

It is a straightforward, no-frills option for a home garage or small workshop. It lets you position a clamped block precisely under the bit without loosening the vise, which is the main reason to choose any cross-slide vise over a plain drill press vise.

Buyers often mention that slide smoothness and gib fit can vary between cast-iron vises of this kind. Expect to wipe off the protective coating, oil the slides and snug the gibs before use, and keep cuts light, as this is not a machine-shop milling vise.

★ 3.8/5 · 3 Amazon ratings✓ Best for: Basic home-shop drilling✗ Not ideal for: Production or heavy millingCheck Price on Amazon →

Conclusions

The Wilton CS4 (11694) is the best all-round pick here, with 4 inch hardened V-groove jaws, a 1-3/8 inch jaw depth and a cast-iron body. It suits hobbyists who want a dependable vise for drilling and light milling. … read more

The Shop Fox D4082 is worth choosing if you want a slide bar to keep the movable jaw guided as you tighten. It is a good fit for drill press work, though expect to oil and adjust the slides when it arrives. … read more

The Grizzly G1064 offers a well-documented set of figures: 4 inches of travel per slide, adjustable gibs and a base with 7/16 inch slots. It suits owners who want clear specifications and basic drilling duty rather than precision milling. … read more

The WEN CV414 stands out for its longer travel of about 5.8 and 6 inches and its dials marked in 0.1 mm steps. It is a good choice if you need more reach or repeatable positioning, as long as cuts stay light. … read more

The Klutch AT-CSV-04 is a plain, cast-iron 4 inch cross-slide vise for general garage drilling. It fits buyers who want a simple X-Y setup and are happy to clean, oil and adjust it before use. … read more

Frequently Asked Questions

Can I use a cross-slide drill press vise for milling?

Only for light work. These cast-iron vises are made for drilling, reaming and very light cuts. They lack the rigidity of a true milling vise, so heavy cuts can cause chatter, slide movement and poor finishes.

Why do the slides on a new cross-slide vise feel stiff?

Cast-iron vises often ship with a protective coating and gibs set tight. Buyers often mention cleaning the slides, applying way oil and adjusting the gib screws a little at a time until the handwheels turn smoothly without noticeable play.

What are gibs and why do they need adjusting?

Gibs are thin wedge strips that fill the gap between sliding dovetail surfaces. Tightening their screws removes side play, while loosening them frees up movement. A good setting lets the slide move easily but without wobble.

How do I mount a cross-slide vise to my drill press table?

Most have slots or holes in the base. Use bolts that match your drill press table slots, along with washers and nuts, and tighten them evenly. Check that the base sits flat so the vise does not rock when you drill.

Do I need to lock the slides before drilling?

It helps. Position the work, then snug the gibs or any slide locks if the vise has them so the table does not creep under drilling force. Use cutting oil, a sharp bit and steady feed pressure for cleaner holes.

We use cookies. Analytics cookies help us understand how visitors use this site. See our Privacy Policy for details.