Go to Homepage
Best Corded Jig Saws Compared for 2026: 5 Top Picks

Best Corded Jig Saws Compared for 2026: 5 Top Picks

Best corded jig saws compared on power, speed, bevel range and blade change. Read the full comparison and pick the saw that suits your curves.

Share

Five corded jig saws compared on power, orbital action, bevel range and blade change so you can pick the right one for curves

A jig saw is the tool most people reach for when a straight line will not do: a sink cutout in a countertop, a scroll shape in plywood, a notch in plastic trim or a curve in thin sheet metal. A corded model never runs out of charge halfway through a long job, which matters on a busy site or during a weekend project that keeps growing.

The differences between corded saws are real, though. This comparison looks at four things: motor power and stroke speed, orbital action settings for faster or cleaner cuts, bevel range and how easily the shoe adjusts, and how the saw handles blade changes and grip.

Below you will find five corded jig saws, four top-handle and one barrel-grip, with the facts that separate them, honest trade-offs, who each suits best and answers to common buyer questions.

ProductAmazon ratingBest forLink
BOSCH 7.0 Amp Top-Handle Corded Jig Saw JS470E ★★ 4.8/5
(1,413)
All-round wood and plywood workView →
DEWALT 6.5 Amp Top-Handle Corded Jig Saw Kit DW331K★ 4.7/5
(1,323)
Fast bevel cuts on siteView →
Makita 4350FCT Top-Handle Jig Saw with Tool-Less Blade Change★ 4.6/5
(673)
Tool-less blade changes, LED lightView →
Milwaukee 6268-21 6.5 Amp Top Handle Orbital Jig Saw★ 4.6/5
(110)
Long reach with a long cordView →
BOSCH 7.2 Amp Barrel-Grip Jig Saw Kit JS572EBK★ 4.6/5
(245)
Tight spots and scrollingView →

BOSCH 7.0 Amp Top-Handle Corded Jig Saw JS470E

Click to view BOSCH 7.0 Amp Top-Handle Corded Jig Saw JS470E

This Bosch carries a 7.0 amp motor and a variable speed range of 500 to 3,100 strokes per minute with a 1 inch stroke length. The shoe bevels to 45 degrees, and the multi-directional clamp takes T-shank blades only, so older U-shank blades will not fit.

Cutting capacity is listed at 5-7/8 inches in soft wood, 7/8 inch in aluminum and 3/8 inch in mild steel, which is the deepest wood figure of the five. A dust blower helps keep the cut line clear. The case holds a bevel wrench, a non-marring overshoe, an anti-splinter insert and a T-shank blade.

The trade-offs are modest. Bevel changes involve the included wrench rather than a keyless lever, and the kit includes just one blade, so most buyers add a few extra blades for plastic and metal.

★ 4.8/5 · 1,413 Amazon ratings✓ Best for: All-round wood and plywood work✗ Not ideal for: Keyless bevel adjustment fansCheck Price on Amazon →

DEWALT 6.5 Amp Top-Handle Corded Jig Saw Kit DW331K

Click to view DEWALT 6.5 Amp Top-Handle Corded Jig Saw Kit DW331K

The DW331K uses a 6.5 amp motor with variable speed from 500 to 3,100 strokes per minute and a 1 inch stroke. It offers four orbital positions, which lets you choose between a slow, clean cut in plywood and an aggressive cut in thick softwood.

The keyless shoe bevels with detents at 0, 15, 30 and 45 degrees, and the all-metal lever-action clamp changes blades without tools. An integrated dust blower clears the line of cut, and an 8 foot cord and a carrying box come in the kit.

At 6.4 pounds it is heavier than the Makita and the barrel-grip Bosch, which shows up during long overhead or vertical cuts. The 8 foot cord is also shorter than the one on the Milwaukee, so an extension cord is often needed.

★ 4.7/5 · 1,323 Amazon ratings✓ Best for: Fast bevel cuts on site✗ Not ideal for: Lightweight overhead workCheck Price on Amazon →

Makita 4350FCT Top-Handle Jig Saw with Tool-Less Blade Change

Click to view Makita 4350FCT Top-Handle Jig Saw with Tool-Less Blade Change

The Makita 4350FCT runs a 6.3 amp motor at 800 to 2,800 strokes per minute through an electronic speed dial, with a 1 inch stroke. It has three orbital settings plus straight cutting, and its die-cast aluminum base tilts up to 45 degrees left or right with a positive stop at 90 degrees.

Blades are changed without tools, and the saw uses T-tang blades. Capacity at 90 degrees is 5-5/16 inches in wood, 3/8 inch in steel and 25/32 inch in aluminum. A built-in LED lights the line of cut, a dust blower clears it, and a dust port accepts an optional nozzle or vacuum.

It weighs 5.7 pounds and comes with six blades, an anti-splinter insert, a cover plate, a hex wrench and a tool case. The main trade-off is the lowest top speed of the group at 2,800 strokes per minute, and bevel changes use the onboard hex wrench.

★ 4.6/5 · 673 Amazon ratings✓ Best for: Tool-less blade changes, LED light✗ Not ideal for: Maximum cutting speedCheck Price on Amazon →

Milwaukee 6268-21 6.5 Amp Top Handle Orbital Jig Saw

Click to view Milwaukee 6268-21 6.5 Amp Top Handle Orbital Jig Saw

The Milwaukee 6268-21 has a 6.5 amp motor, a variable trigger and dial reaching 3,000 strokes per minute, and a 1 inch stroke. Four orbital positions cover everything from fine finish cuts to quick rough cuts, and the keyless shoe adjusts up to 45 degrees in both directions.

Its Quik-Lok blade clamp swaps blades without a separate tool, and an LED lights the sight line ahead of the blade. The 12 foot 8 inch cord is the longest of the five, which keeps you moving around a sheet of plywood without hunting for an outlet.

The kit contains the saw, a carrying case, a dust shield and two blades. The trade-offs are a top speed slightly under the 3,100 strokes per minute of the Bosch JS470E and the DEWALT, and keeping the cut line clear may rely on the dust shield or a shop vacuum.

★ 4.6/5 · 110 Amazon ratings✓ Best for: Long reach with a long cord✗ Not ideal for: Highest stroke speed seekersCheck Price on Amazon →

BOSCH 7.2 Amp Barrel-Grip Jig Saw Kit JS572EBK

Click to view BOSCH 7.2 Amp Barrel-Grip Jig Saw Kit JS572EBK

This is the only barrel-grip saw here. It has a 7.2 amp motor, 800 to 3,000 strokes per minute, a 1 inch stroke and four orbital settings. The shoe bevels up to 45 degrees in either direction, and the multi-directional clamp accepts T-shank blades only.

At 4.85 pounds and under 10 inches long it is the lightest and most compact saw in the comparison, and the low grip suits tight spots, vertical cuts and detailed scrolling where the hand stays close to the work. An LED and a dust blower each have their own on and off switch.

Capacity is 5-1/2 inches in soft wood, 7/8 inch in aluminum and 3/8 inch in mild steel. The kit includes a plastic shoe, an anti-splinter insert, three T-shank blades and a carrying case. The trade-off is that a barrel grip gives less downward leverage than a top handle on thick stock, and wood capacity is a little below the JS470E.

★ 4.6/5 · 245 Amazon ratings✓ Best for: Tight spots and scrolling✗ Not ideal for: Pushing through thick stockCheck Price on Amazon →

Conclusions

The BOSCH JS470E is the strongest all-round choice here, pairing a 7.0 amp motor and 5-7/8 inch soft wood capacity with a useful kit. It suits carpenters and serious DIYers who cut curves in thick boards and plywood most often. … read more

The DEWALT DW331K suits tradespeople who make angled cuts often, since its keyless shoe has bevel detents at 0, 15, 30 and 45 degrees and its four orbital positions cover most materials. Allow for its 6.4 pound weight and 8 foot cord. … read more

The Makita 4350FCT is a good fit for anyone who values a built-in LED, tool-less blade changes and a dust port for vacuum hookup. It tops out at 2,800 strokes per minute, so it is a better match for careful cutting than for speed. … read more

The Milwaukee 6268-21 makes sense for workers who move around large panels, thanks to its 12 foot 8 inch cord, LED and four orbital positions. It reaches 3,000 strokes per minute and comes with a case, a dust shield and two blades. … read more

The BOSCH JS572EBK is the pick for tight spaces, vertical cuts and detailed scrollwork, with a 4.85 pound barrel-grip body and 7.2 amp motor. Choose a top-handle saw instead if you push through thick stock all day. … read more

Frequently Asked Questions

What is the difference between a top-handle and a barrel-grip jig saw?

A top-handle saw is held from above, which gives more downward pressure for thick wood. A barrel-grip saw, like the BOSCH JS572EBK at 4.85 pounds, sits lower and is more compact, which suits tight spots, vertical cuts and detailed scrolling.

What does orbital action do on a jig saw?

Orbital action moves the blade slightly forward on the upstroke so it cuts faster and clears chips. Higher settings suit thick softwood, while the lowest setting or straight cutting gives cleaner edges in plywood, plastic and metal. The DEWALT, Milwaukee and BOSCH barrel-grip saws have four settings, and the Makita has three plus straight.

Can a corded jig saw cut thin metal?

Yes, with a metal-cutting blade and a slow speed. Capacity figures in mild steel are 3/8 inch for the BOSCH JS470E, the BOSCH JS572EBK and the Makita 4350FCT. Thin sheet metal is well within range.

Do these jig saws take T-shank or U-shank blades?

The two BOSCH saws accept T-shank blades only and do not take U-shank blades. The Makita uses T-tang blades, and the DEWALT clamp accepts T-shank blades. Buy blades to match the shank type before you start a project.

Which of these saws can make bevel cuts?

All five tilt the shoe up to 45 degrees. The DEWALT DW331K has detents at 0, 15, 30 and 45 degrees, the Milwaukee 6268-21 has a keyless shoe that tilts both ways, and the Makita tilts left or right with a stop at 90 degrees.

We use cookies. Analytics cookies help us understand how visitors use this site. See our Privacy Policy for details.