Best Bi-Metal Hole Saw Kits Compared for 2026: 5 Top Picks
Best bi-metal hole saw kits compared for electricians, plumbers and general use, with sizes, depth and trade-offs. See which kit fits your jobs.
Five bi-metal hole saw kits compared by sizes, cutting depth and mandrel system so you can pick the right set for your trade
Buying hole saws one at a time gets expensive and leaves you without the right size when a job needs it. A good kit solves that, but kits differ a lot. Some are built around electrical conduit knockouts, others around plumbing pass-throughs, and others try to cover a bit of everything for wood, drywall, plastic and thin metal.
Four criteria separate the useful kits from the shelf fillers. First, the size range: does it include the diameters you actually cut, and does it reach large enough for recessed fixtures or drain pipes. Second, cutting depth, which decides whether a saw can pass through framing in one pass. Third, the mandrel system, because quick-change designs save time on repeat holes. Fourth, how easily the plug comes out of the cup and how the case keeps everything organized.
Below you will find five bi-metal kits compared on those points, with honest trade-offs for each, so you can match a kit to your trade and avoid paying for sizes you will never use.
| Product | Amazon rating | Best for | Link |
|---|---|---|---|
| Diablo Bi-Metal Hole Saw Set for Electricians DHS16SEL, 16-Piece ★ | ★ 4.6/5 (160) | Electricians needing wide size range | View → |
| DEWALT Hole Saw Kit 14-Piece D180005 | ★ 4.6/5 (1,259) | General carpentry and remodeling | View → |
| Milwaukee 49-22-4025 13-Piece General Purpose Hole Dozer Hole Saw Kit | ★ 4.6/5 (530) | Mixed-trade jobsite cutting | View → |
| DEWALT Hole Saw Kit Standard Electrician's Set D180002, 9-Piece | ★ 4.6/5 (1,276) | Conduit and box work | View → |
| Lenox 308011200P Bi-Metal Speed Slot Hole Saw Plumber's Kit, 17-Piece | ★ 4.2/5 (71) | Plumbers drilling pipe pass-throughs | View → |
Diablo Bi-Metal Hole Saw Set for Electricians DHS16SEL, 16-Piece
The Diablo DHS16SEL is a 16-piece electrician set built around ten bi-metal saw cups in 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2, 3, 3-5/8, 4-1/8 and 4-1/2 inch sizes. That spread covers conduit knockouts at the small end and recessed lights or larger boxes at the top. Two Snap-Lock Plus mandrels, two pilot bits and two adaptor nuts complete the kit.
Cutting depth is 2-3/8 inches, enough to pass through a single 2x4 or 2x6 stud with room to spare, and the cups use tool-free plug ejection, which saves time when you cut many holes in a row. Buyers often mention the wide size range and the quick mandrel swaps. The trade-off is bulk: ten cups and two mandrels make this a substantial kit to carry, and anyone who needs only two or three sizes will be paying for cups that rarely leave the case.
DEWALT Hole Saw Kit 14-Piece D180005
The DEWALT D180005 is a 14-piece general-purpose kit with 11 bi-metal hole saws, a small and a large quick-change mandrel, and pilot point bits. Sizes run from 3/4 inch to 2-1/2 inch in close steps: 3/4, 7/8, 1, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2, 2-1/8, 2-1/4 and 2-1/2 inch.
That makes it a handy choice for door hardware, cable and pipe pass-throughs, and smaller fixtures in wood, drywall, plastic and thin metal. The quick-change mandrels let you swap saws without tools, a feature buyers often appreciate when they move between sizes during a job. The limit is the top end: nothing is larger than 2-1/2 inches, so recessed can lights or wide duct openings call for another saw. Compared with the smaller DEWALT electrician set, this kit gives more in-between sizes rather than a different range.
Milwaukee 49-22-4025 13-Piece General Purpose Hole Dozer Hole Saw Kit
The Milwaukee 49-22-4025 is a 13-piece Hole Dozer kit with nine bi-metal saws in 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2, 2-1/8 and 2-1/2 inch sizes, plus arbors and pilot bits, all in a carry case. It is aimed at general work in wood, plastic and thin metal rather than at one trade.
Its Rip Guard tooth design is backed by a limited lifetime tooth-break warranty, a useful point for crews that cut into nail-embedded wood. The kit also works with Milwaukee quick-change arbors, so it fits neatly into a system you may already own.
The trade-offs are the 2-1/2 inch ceiling and fewer intermediate sizes than the DEWALT 14-piece kit. It is also a general kit, so electricians who want every conduit knockout size up to 4-1/2 inches will find a wider spread elsewhere.
DEWALT Hole Saw Kit Standard Electrician’s Set D180002, 9-Piece
The DEWALT D180002 is a compact 9-piece electrician’s set with six bi-metal saws, two mandrels and a kit box. The saws come in 7/8, 1-1/8, 1-3/8, 1-3/4, 2 and 2-1/2 inch sizes, which line up with the standard knockout sizes for 1/2, 3/4, 1, 1-1/4, 1-1/2 and 2 inch conduit.
Where the 14-piece D180005 offers eleven general-purpose sizes, this kit trims the selection to the diameters electricians cut most, so the case is smaller and lighter and nothing sits unused. That focus is also the limit: there are no sizes for recessed lights or large boxes, and no in-between sizes such as 1 or 1-1/2 inch for general carpentry.
For a service van or tool bag that mostly sees conduit and box work, the smaller footprint is a real advantage. For wider work, a bigger kit makes more sense.
Lenox 308011200P Bi-Metal Speed Slot Hole Saw Plumber’s Kit, 17-Piece
The Lenox 308011200P is a 17-piece plumber’s kit with twelve bi-metal saws running from 3/4 inch up to 4-1/2 inch, two snap-back arbors (2L and 5L) and three pilot drills. The larger sizes suit drain and supply pipe pass-throughs in studs, joists and plates.
Its Speed Slot design uses wide, staircase-style slots low on each saw, giving several leverage points so you can pry out a stuck plug with a screwdriver. Lenox also describes the T3 design as cutting faster than its earlier hole saws, a manufacturer claim worth weighing against your own materials.
The trade-offs are the number of pieces to carry and sizes that are chosen around plumbing. Electricians who need exact conduit knockout diameters will find the Diablo or DEWALT electrician kits a closer match.
Conclusions
The Diablo DHS16SEL is the strongest all-round choice here. It combines ten sizes from 7/8 to 4-1/2 inches with a 2-3/8 inch cutting depth and tool-free plug ejection. Pick it if you cut both small knockouts and larger fixture openings. … read more
The DEWALT D180005 suits remodelers and general carpenters who want many close sizes between 3/4 and 2-1/2 inches with quick-change mandrels. Skip it if your work needs holes wider than 2-1/2 inches. … read more
The Milwaukee 49-22-4025 is a good fit for crews already using Milwaukee quick-change arbors, with Rip Guard teeth and a tooth-break warranty. It tops out at 2-1/2 inches and has fewer in-between sizes than the DEWALT 14-piece kit. … read more
The DEWALT D180002 is the lean electrician option, with six saws sized to common conduit knockouts and a small kit box. Choose it for a lighter bag, but not if you need larger openings or general carpentry sizes. … read more
The Lenox 308011200P is the plumber’s pick, with twelve saws up to 4-1/2 inches and Speed Slot cups that make plug removal easier. It is less suited to electricians who need exact conduit sizes, and it is a larger kit to carry. … read more
Frequently Asked Questions
What size hole saw do I need for conduit knockouts?
Common matches are 7/8 inch for 1/2 inch conduit, 1-1/8 inch for 3/4 inch, 1-3/8 inch for 1 inch, 1-3/4 inch for 1-1/4 inch, 2 inch for 1-1/2 inch and 2-1/2 inch for 2 inch. The DEWALT D180002 and Diablo DHS16SEL both include all of these.
How deep can the Diablo DHS16SEL hole saws cut?
The cups have a 2-3/8 inch cutting depth. That is enough to go through a single 2x4 or 2x6 stud, which is 1-1/2 inches thick, in one pass. Thicker stacked material needs the cut finished from the other side.
What is the difference between the two DEWALT kits in this comparison?
The D180005 is a 14-piece kit with eleven saws from 3/4 to 2-1/2 inches in close steps. The D180002 is a 9-piece electrician's set with six saws sized to conduit knockouts, two mandrels and a kit box.
Which kit is best for plumbing work?
The Lenox 308011200P is built for it, with twelve saws from 3/4 to 4-1/2 inches, 2L and 5L arbors, three pilot drills and Speed Slot cups for prying out stuck plugs with a screwdriver.
Can bi-metal hole saws cut metal as well as wood?
Yes, bi-metal saws are made for wood, drywall, plastic and thin metal. Cutting metal calls for a slower speed than wood, steady pressure and cutting oil. These kits are meant for thin material rather than thick structural steel.



