Go to Homepage
Best Benchtop Thickness Planers Compared for 2026: 5 Top Picks

Best Benchtop Thickness Planers Compared for 2026: 5 Top Picks

Best benchtop thickness planers compared: five corded 12.5 to 13 inch models side by side on cutterheads and capacity. Find your match today

Share

Five corded benchtop planers compared so you can match cutterhead type, board capacity and feed speeds to the work you actually do

Rough lumber is cheaper and more flexible than pre-milled boards, but only if you can flatten it to a consistent thickness. A benchtop thickness planer does that job, yet the choices look similar on paper and differ a lot once a board is feeding through. Picking the wrong one means extra sanding, tearout on tricky grain, or a machine that is heavier than your shop can handle.

Four criteria separate these machines most. Cutterhead design matters first, because straight knives and spiral-style cutters leave different surfaces and are serviced differently. Capacity comes next: maximum board width and thickness, and how deep each pass can cut. Feed speed and cuts per inch decide how fine the finish is. Weight and dust handling shape how easy the machine is to live with.

Below you will find five corded, bare benchtop planers in the 12.5 to 13 inch class, each described by its published specifications and its honest trade-offs. A short pick-by-pick conclusion and a buyer FAQ follow, so you can narrow the list quickly.

ProductAmazon ratingBest forLink
DEWALT 13-Inch Three-Knife Two-Speed Thickness Planer DW735X ★★ 4.7/5
(7,535)
Fine finish and flexibilityView →
WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness Planer★ 4.7/5
(747)
Figured grain and tearoutView →
Makita 2012NB 12-Inch Portable Planer★ 4.5/5
(781)
Simple, no-frills planingView →
DEWALT 12-1/2-Inch Three-Knife Benchtop Planer DW734★ 4.7/5
(2,769)
Three-knife value setupView →
WEN PL1252 15-Amp 12.5-Inch Two-Blade Benchtop Thickness Planer★ 4.6/5
(528)
Light, portable shop useView →

DEWALT 13-Inch Three-Knife Two-Speed Thickness Planer DW735X

Click to view DEWALT 13-Inch Three-Knife Two-Speed Thickness Planer DW735X

The DW735X is a corded, bare 13-inch benchtop planer with a 15-amp motor rated at 20,000 RPM, which spins the three-knife cutterhead at 10,000 RPM. A two-speed gearbox gives either 96 cuts per inch for faster stock removal or 179 cuts per inch for finishing passes, and the machine takes boards up to 13 inches wide. A fan-assisted chip ejection system and an included dust hose adapter help clear shavings, and the kit adds infeed and outfeed tables, an extra set of knives and a blade-change wrench. The maker backs it with a three-year limited warranty.

The main trade-off is size. Retailers list the machine at roughly 92 pounds, so moving it between shop and job site is a two-person or two-trip task. Reversible knives also need changing when they dull, which is quick on this design but still a maintenance step that spiral-style cutterheads handle one cutter at a time.

★ 4.7/5 · 7,535 Amazon ratings✓ Best for: Fine finish and flexibility✗ Not ideal for: Frequent lifting and carryingCheck Price on Amazon →

WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness Planer

Click to view WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness Planer

The PL1326 is a corded, bare 13-inch benchtop planer with a 15-amp motor and a spiral-style cutterhead built from 26 small staggered cutters, turning at 10,000 RPM. Spiral heads are often chosen for figured or interlocked grain because each cutter meets the wood at a shearing angle. Two feed speeds, 16 and 26 feet per minute, let you pick a finishing or a dimensioning pace. It accepts boards up to 13 inches wide and 6 inches thick.

Depth of cut is 1/8 inch on stock under 6 inches wide and 1/16 inch on wider stock, so a full-width board needs more passes to remove the same amount of wood. It is also a heavy machine for a benchtop unit. Buyers often mention the appeal of rotating individual cutters to a fresh edge rather than changing a full knife.

★ 4.7/5 · 747 Amazon ratings✓ Best for: Figured grain and tearout✗ Not ideal for: Fast full-width stock removalCheck Price on Amazon →

Makita 2012NB 12-Inch Portable Planer

Click to view Makita 2012NB 12-Inch Portable Planer

The 2012NB is a corded, bare 12-inch portable planer with a 15-amp motor and a two-knife cutterhead running at 8,500 RPM. It cuts boards up to 12 inches wide and 6-3/32 inches thick, with a maximum depth of 1/8 inch per pass. The published feed rate is 8.5 meters per minute, which is close to 28 feet per minute.

Two knives at that feed rate produce fewer cuts per inch than the three-knife machines in this group, so finish passes on figured wood may need more sanding or scraping afterward. It has a single feed rate and a straight-knife head, with no spiral cutterhead and no second finishing speed, so the design stays simple but offers fewer ways to tune the surface. It is a reasonable fit for a smaller shop planing straightforward stock that wants a no-frills machine.

★ 4.5/5 · 781 Amazon ratings✓ Best for: Simple, no-frills planing✗ Not ideal for: Glassy finish straight offCheck Price on Amazon →

DEWALT 12-1/2-Inch Three-Knife Benchtop Planer DW734

Click to view DEWALT 12-1/2-Inch Three-Knife Benchtop Planer DW734

The DW734 is a corded, bare 12-1/2-inch benchtop planer with a 15-amp motor and a three-knife cutterhead turning at 10,000 RPM, producing up to 96 cuts per inch. It handles boards up to 12-1/2 inches wide and 6 inches thick, with a maximum depth of 1/8 inch per pass. Infeed and outfeed tables give a combined 33-1/2 inches of material support, and a dust hood comes with it.

Compared with the larger DW735X, it lists only a 96 cuts per inch setting rather than a second, finer one, so the finish comes from the knives alone rather than a slower feed, and it is a half inch narrower in width. It suits a shop that wants a three-knife planer with a familiar layout and does not need an extra finishing speed. As with any straight-knife machine, the reversible knives need changing when they dull.

★ 4.7/5 · 2,769 Amazon ratings✓ Best for: Three-knife value setup✗ Not ideal for: Wide boards, finest finishCheck Price on Amazon →

WEN PL1252 15-Amp 12.5-Inch Two-Blade Benchtop Thickness Planer

Click to view WEN PL1252 15-Amp 12.5-Inch Two-Blade Benchtop Thickness Planer

The PL1252 is a corded, bare 12.5-inch benchtop planer with a 15-amp motor that delivers up to 20,000 cuts per minute at a feed rate of 26 feet per minute. Two reversible 12.5-inch SK5 steel blades do the cutting, and the depth adjustment runs from 0 to 1/8 inch per pass. It takes boards up to 12.5 inches wide and 6 inches thick, has a 2-inch dust port, and the manufacturer lists a weight of 55.6 pounds, making it the lightest machine in this comparison.

The trade-offs follow from the two-blade head. With only two blades at a single listed feed rate, the surface will usually be rougher than on three-knife or spiral machines and may need more finish sanding. A 2-inch port also suits a shop vacuum better than a large dust collector hose. A two-year warranty is offered.

★ 4.6/5 · 528 Amazon ratings✓ Best for: Light, portable shop use✗ Not ideal for: Premium surface finishCheck Price on Amazon →

Conclusions

The DEWALT DW735X is the strongest all-round choice here if you want a 13-inch capacity, a two-speed gearbox with 96 or 179 cuts per inch, and fan-assisted chip ejection. Expect a heavy machine, and plan for knife changes over time. … read more

The WEN PL1326 suits woodworkers who plane figured or swirling grain and want a spiral-style cutterhead with 26 small cutters, plus 13-inch width and two feed speeds. Its 1/16 inch depth on stock wider than 6 inches means more passes on broad boards. … read more

The Makita 2012NB fits a smaller shop that wants a straightforward 12-inch planer with a 15-amp motor and two knives. It offers 6-3/32 inches of thickness capacity, but fewer cuts per inch than the three-knife models means more finish work afterward. … read more

The DEWALT DW734 is a good match if you want three knives and 96 cuts per inch in a 12-1/2 inch machine with 33-1/2 inches of table support. It lacks the second, finer speed of the DW735X, so the finish depends on its knives. … read more

The WEN PL1252 is the one to consider when weight matters most, at a listed 55.6 pounds with a 2-inch dust port and 12.5-inch capacity. Its two-blade head at a single feed rate is better for rough dimensioning than for a final surface. … read more

Frequently Asked Questions

What is the difference between a spiral cutterhead and a straight-knife planer?

A straight-knife head, like the three-knife DW735X and DW734, uses full-width knives that are reversed or replaced when dull. A spiral-style head, like the WEN PL1326 with 26 small staggered cutters, shears across the grain, which is often chosen for figured wood, and cutters are rotated individually.

What does cuts per inch mean on a planer?

It describes how many knife marks are made along each inch of the board. More cuts per inch means smaller ridges and a smoother surface. The DW735X offers 96 or 179 cuts per inch through its two-speed gearbox, while the DW734 is listed at 96.

How thick a board can these benchtop planers handle?

The DEWALT DW735X, DW734 and both WEN models list a 6-inch thickness capacity. The Makita 2012NB is listed at 6-3/32 inches. Maximum width ranges from 12 inches on the Makita to 13 inches on the DW735X and PL1326.

How much wood can I remove in one pass?

Most of these machines list a maximum depth of 1/8 inch per pass. The WEN PL1326 allows 1/8 inch on stock under 6 inches wide but only 1/16 inch on wider boards, so wide stock needs more passes. Lighter cuts generally give a cleaner finish.

Do these planers come ready to use out of the box?

They are corded, bare machines that plug into a standard 120-volt outlet, with no battery needed. The DW735X kit includes infeed and outfeed tables, a dust hose adapter and an extra set of knives, and the DW734 includes a dust hood.

We use cookies. Analytics cookies help us understand how visitors use this site. See our Privacy Policy for details.