Best 16-Piece Forstner Bit Sets Compared for 2026: 5 Top Picks
Best 16-piece Forstner bit sets compared for flat-bottom holes in wood, with steel, edge and shank details. See which set fits your shop.
Five 16-piece Forstner bit sets compared on steel, cutting edge, shank and case so you can pick the right one for flat-bottom holes
Hinge pockets, hardware recesses, dowel counterbores and shallow mortises all call for a clean, flat-bottomed hole, and a standard twist bit cannot make one. A Forstner bit can, but a full set is a real purchase, and the differences between sets are easy to miss until a bit wanders, burns or chatters in hardwood.
This comparison looks at five 16-piece sets covering 1/4 inch to 2-1/8 inch, all aimed at use in a drill press or a drill. The main criteria are the steel, the design of the cutting rim, the shank and overall length, and what the set comes stored in.
Below you will find a short overview of each set, who it suits and where it falls short, followed by a clear editor’s pick and answers to common questions about speeds, drill chucks and getting a clean hole.
| Product | Amazon rating | Best for | Link |
|---|---|---|---|
| Freud PB-100 16-Piece Forstner Bit Set ★ | ★ 4.5/5 (253) | Clean hinge and hardware pockets | View → |
| Diablo FB-100 16-Piece Forstner Bit Set | ★ 4.6/5 (138) | Deeper holes in hardwood | View → |
| Fisch Black Shark Forged 16-Piece Forstner Bit Set | ★ 4.5/5 (126) | Frequent shop use with chip clearance | View → |
| Bora Tempest 16-Piece Forstner Bit Set BFB-009881 | ★ 4.6/5 (21) | Organized storage and hardwood work | View → |
| COMOWARE 16-Piece Forstner Bit Set Carbon Steel | ★ 4.4/5 (296) | Hobby and occasional projects | View → |
Freud PB-100 16-Piece Forstner Bit Set
The Freud PB-100 is a 16-piece set running from 1/4 inch to 2-1/8 inch in 1/8 inch steps. Its bits use a precision shear serrated edge, a rim design meant to slice wood fibers cleanly and leave a flat floor in plywood, hardwood and softwood. The set is intended for both drill presses and hand-held drills.
Shank sizes step up across the set, from 1/4 inch on the smallest bits to 3/8 inch on larger ones, so a common 3/8 inch chuck handles the whole range. The maker backs the set with a limited lifetime guarantee. Buyers often mention clean-walled holes and an easy start from the center point, which suits cabinetmakers and furniture builders who bore many hinge cups and hardware pockets.
The trade-off is that large bits still demand a slow drill press speed and a clamped workpiece, as with any Forstner set, and a serrated rim will not cut as aggressively as a heavy sawtooth design in thick stock.
Diablo FB-100 16-Piece Forstner Bit Set
The Diablo FB-100 is a high-speed steel Forstner set covering 1/4 inch to 2-1/8 inch in 1/8 inch increments, with bits about 3-1/2 inches long. Each bit has a center spur to locate the hole and keep the bit from walking at the start of the cut. The shanks are straight, and the set works in a drill press or in a hand-held drill with at least a 3/8 inch chuck.
High-speed steel holds an edge well in hardwoods and tolerates heat better than plain carbon steel, which is useful when boring many holes in a row. The 3-1/2 inch length also gives some reach for deeper holes or for boring through thicker stock without a bit extension.
On the downside, it is a no-frills set that suits buyers who care mostly about steel and length rather than extras. Like other sets here, larger diameters should be run slowly with the work clamped down.
Fisch Black Shark Forged 16-Piece Forstner Bit Set
The Fisch Black Shark set holds 16 bits from 1/4 inch to 2-1/8 inch, made from high-speed steel that is then forged. Each bit has a small center point, two peripheral cutting edges and two lifters that clear chips from the hole. Overall length is about 3-1/2 inches, and the set comes in a wooden case.
The bits use a reduced cylindrical shank, meaning the shank is smaller than the cutting diameter on larger sizes so it fits ordinary drill chucks. Shank size steps up from 1/4 inch on small bits to 3/8 inch on bits of 3/4 inch and larger, so the whole set fits a 3/8 inch chuck.
This is a set for woodworkers who bore holes frequently and want chip clearance and a durable steel. The wooden case is a plus for a shop that stores bits in a drawer or carries them to a job site. As with any Forstner bit, a slow speed and a clamped workpiece give the best results, and the larger sizes are better suited to a drill press than to a hand drill.
Bora Tempest 16-Piece Forstner Bit Set BFB-009881
The Bora Tempest BFB-009881 is a 16-piece high-speed steel Forstner set spanning 1/4 inch to 2-1/8 inch, supplied in a wooden case. The bits in the Tempest line have precision-ground edges and are generally about 3-1/2 inches long, with a 3/8 inch shank on the larger sizes. They are meant for drill presses and hand-held drills in hardwood and softwood.
The wooden box keeps the bits organized and protects the cutting edges between jobs, which matters for a set that includes large, easily damaged rims. High-speed steel gives it a good balance of edge retention and heat tolerance for repeated boring in dense woods.
It suits woodworkers who want a premium-style set with a proper case for furniture, cabinet and hardware work. The main trade-off is that it is a specialty set, so the largest bits should be used on a drill press at slow speed with the work clamped. Buyers who only need a few common sizes may find a smaller set enough.
COMOWARE 16-Piece Forstner Bit Set Carbon Steel
The COMOWARE set offers 16 carbon steel Forstner bits from 1/4 inch to 2-1/8 inch for boring flat-bottom holes in wood. Carbon steel is easier to sharpen than harder steels and is a common choice for hobby sets, and the bits are described as hardened and tempered for durability. Some sellers also mention use in plastics and PVC.
It suits the occasional builder, hobbyist or homeowner who needs a full range of sizes for projects such as shelf-pin holes, cabinet hardware, toy making or decorative inlays without spending on a professional-grade set. A full 16-size range gives a lot of flexibility for the money.
The trade-offs are the usual ones for carbon steel. It can dull sooner than high-speed steel in dense hardwoods and heats up more quickly if the speed is too high, so it is best used at a slow speed with the work clamped and with pauses to clear chips. A tradesperson drilling all day will likely want a harder steel.
Conclusions
The Freud PB-100 is a strong choice if you want clean flat-bottom holes in cabinet and furniture work. Its serrated rim, full 1/4 to 2-1/8 inch range and 3/8 inch-friendly shanks make it a dependable all-round set for a drill press. … read more
The Diablo FB-100 suits woodworkers who want high-speed steel and bits about 3-1/2 inches long for deeper holes. Its straight shanks fit a 3/8 inch chuck, and it handles hardwood boring well when run slowly with the work clamped. … read more
The Fisch Black Shark Forged set is a good fit for frequent shop use. Forged high-speed steel, two lifters for chip clearance and a wooden case make it a practical set for woodworkers who bore holes often and want bits kept organized. … read more
The Bora Tempest BFB-009881 is a solid pick for woodworkers who value a well-organized wooden case with high-speed steel bits. It covers the full 1/4 to 2-1/8 inch range for furniture, cabinet and hardware work in hardwood and softwood. … read more
The COMOWARE 16-piece set is the budget-minded option for hobbyists and occasional builders. Its carbon steel bits cover the full size range, though they are better for light use and slow speeds than for daily professional boring. … read more
Frequently Asked Questions
What speed should I use with a large Forstner bit?
Use a slower speed as the diameter grows. Small bits can run faster, while bits around 1-1/2 inch and larger are generally run at the slowest drill press setting. Slower speeds reduce heat and burning, and the workpiece should always be clamped.
Can I use a Forstner bit set in a hand-held drill?
Yes, the sets here are intended for drill presses and hand-held drills, but large bits grab and need a firm grip and a corded drill with plenty of torque. A drill press with a clamped workpiece gives better control and a more consistent flat bottom.
Is high-speed steel better than carbon steel for Forstner bits?
High-speed steel generally holds an edge longer and handles heat better, which helps in dense hardwoods and repeated boring. Carbon steel is easier to sharpen and works well for lighter hobby use at slower speeds, though it can dull sooner.
What does a reduced shank mean on a Forstner bit?
A reduced shank is smaller than the cutting diameter of the bit, so large bits still fit a standard drill chuck. In these sets the shanks run from about 1/4 inch on small bits to 3/8 inch on larger ones, so a 3/8 inch chuck covers the range.
How do I get a clean flat-bottom hole without tear-out?
Clamp the work firmly, start at a slow speed, let the center point locate the hole, and back the bit out regularly to clear chips. A backer board under the workpiece helps when boring all the way through to reduce splintering on the exit side.



